PartsTable TECHNICAL DATA SHEET
NSN 5305-00-464-2774Government record, cited

Screw, Close Tolerance5305-00-464-2774

NSN 5305-00-464-2774 · NIIN 004642774
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-464-2774 · 5305004642774 · NIIN 004642774 · 00-464-2774 · FSC 5305 Screws · 106334-4-14 · 106334-4-14
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Fastener Length: 1.185 INCHES MINIMUM AND 1.222 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.316 INCHES NOMINAL IN
  • Hardness Rating: 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
  • Material Document and Classification: SPS-M-107 CAGEC 56878 MFR REF SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.250 INCHES IN
  • Head Style: FLAT COUNTERSUNK
Identification
  • NSN: 5305-00-464-2774
  • NIIN: 004642774
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-00-464-2774, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-464-2774
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Fastener Length1.185 INCHES MINIMUM AND 1.222 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationNAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.316 INCHES NOMINAL IN
Hardness Rating45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationSPS-M-107 CAGEC 56878 MFR REF SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
Grip Diameter0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OVERALL
Minimum Tensile Strength132000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
Countersink Angle99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.389 INCHES MINIMUM AND 0.394 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5320-00-932-4005HS67-8-13 POSSIBLE MATCH
PIN-RIVET
Possible match (shared part number)Hi-Shear Corporation
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
106334-4-14 3/2 Design control — primary reference
U.S. Government activity
106334-4-14 5/9 Secondary reference
Sps Technologies, Llc Dba PB Fasteners
Related Parts
5320-00-932-4005POSSIBLE MATCH
PIN-RIVET
HS67-8-13

Frequently Asked Questions

What is NSN 5305-00-464-2774?

NSN 5305-00-464-2774 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-00-464-2774?

1 possible match (shared part number, not a government interchangeability claim): 5320-00-932-4005. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-00-464-2774?

Key specifications for 5305-00-464-2774: Fastener Length: 1.185 INCHES MINIMUM AND 1.222 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.316 INCHES NOMINAL IN; Hardness Rating: 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-464-2774 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com