The Setscrew, cataloged under National Stock Number 5305-00-462-7018, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Am General Llc. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-462-7018 |
| Primary Part Number | K700001 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Am General Llc |
| Status | ACTIVE |
| Head Height | 0.335 INCHES NOMINAL IN |
| Point Length | 0.343 INCHES NOMINAL IN |
| Fastener Length | 1.156 INCHES NOMINAL IN |
| Thread Length | 0.687 INCHES NOMINAL IN |
| Hole Configuration Style | HEXAGON FLATS |
| Point Chamfer Angle | 90.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.437 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Width Between Flats | 0.437 INCHES NOMINAL IN |
| Internal Drive Style | W/O INTERNAL DRIVE |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 14 |
| Material | STEEL OVERALL |
| Hole Quantity | 2 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Hole Type | DRILLED |
| Hole Diameter | 0.093 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| K700001 PRIMARY | Am General Llc (USA) |
NSN 5305-00-462-7018 is a Setscrew, manufactured by Am General Llc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-462-7018 has 1 manufacturer part number on file: K700001 (Am General Llc).
1 possible match (shared part number, not a government interchangeability claim): 5330-01-258-8989. Verify interchangeability with system specifications before substitution.
Key specifications for K700001: Head Height: 0.335 INCHES NOMINAL IN; Point Length: 0.343 INCHES NOMINAL IN; Fastener Length: 1.156 INCHES NOMINAL IN; Thread Length: 0.687 INCHES NOMINAL IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.