The Screw,machine, cataloged under National Stock Number 5305-00-460-3041, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-460-3041 |
| Primary Part Number | BA45095-3-6 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.702 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN |
| Screw Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE |
| Thread Length | 0.317 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | TORQUE SET |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| BA45095-3-6 PRIMARY | Huck International, Inc (USA) |
| AIC84-3-6 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| SC1711-3-6 PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| Reference | Meaning |
|---|---|
| BA45095-3-6 | 5/9 Secondary reference U.S. Government activity |
| 202-15523-3-6 | 7/2 Vendor item drawing reference U.S. Government activity |
| 106363-3-6 | 3/2 Design control — primary reference U.S. Government activity |
| 106363-3-6 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
NSN 5305-00-460-3041 is a Screw,machine, manufactured by Huck International, Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-460-3041 has 3 manufacturer part numbers on file: BA45095-3-6 (Huck International, Inc), AIC84-3-6 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), SC1711-3-6 (Howmet Global Fastening Systems Inc).
Key specifications for BA45095-3-6: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.702 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN; Screw Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE; Thread Length: 0.317 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.