The Screw,machine, cataloged under National Stock Number 5305-00-455-2547, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Carl Zeiss Ag. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-455-2547 |
| Primary Part Number | JNR88.130 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Carl Zeiss Ag |
| Status | ACTIVE |
| Screw Surface Treatment | OXIDE |
| Fastener Length | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE |
| Thread Length | 0.074 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Departure From Cited Designator | AS MODIFIED BY FINISH |
| Nondefinitive Spec/std Data | 3 TYPE AND 2C STYLE |
| Screw Material | STEEL CORROSION RESISTING OR STEEL |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| JNR88.130 | Carl Zeiss Ag (DEU) |
| 88.130 | Carl Zeiss Ag (DEU) |
| Reference | Meaning |
|---|---|
| 418331-26 | 5/1 Secondary reference U.S. Government activity |
| MS51959-26B | 2/2 Government specification standardization U.S. Government activity |
| 222391-026 | 5/1 Secondary reference U.S. Government activity |
| FFS92 | 4/1 Identification reference U.S. Government activity |
NSN 5305-00-455-2547 is a Screw,machine, manufactured by Carl Zeiss Ag, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-455-2547 has 2 manufacturer part numbers on file: JNR88.130 (Carl Zeiss Ag), 88.130 (Carl Zeiss Ag).
2 possible matches (shared part number, not a government interchangeability claim): 5360-00-915-2425, 3815-01-682-6046. Verify interchangeability with system specifications before substitution.
Key specifications for JNR88.130: Screw Surface Treatment: OXIDE; Fastener Length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE; Thread Length: 0.074 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.