The Screw,close Tolerance, cataloged under National Stock Number 5305-00-442-4256, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 21 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-442-4256 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 1.765 INCHES MINIMUM AND 1.782 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE GRIP |
| Thread Length | 1.235 INCHES MINIMUM AND 1.252 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| Single Shear Strength | ERR-060 |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.530 INCHES NOMINAL IN |
| Grip Diameter | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM GRIP |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| A51P12507-13 | 5/9 Secondary reference Northrop Grumman Systems Corporation |
| A51P12507-13 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Aeronautics Systems |
| A51P12507-13 | C/1 Advisory reference — outside the item-of-supply concept Northrop Grumman Systems Corporation |
NSN 5305-00-442-4256 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-442-4256: Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 1.765 INCHES MINIMUM AND 1.782 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE GRIP; Thread Length: 1.235 INCHES MINIMUM AND 1.252 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.