The Screw,close Tolerance, cataloged under National Stock Number 5305-00-436-7732, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-436-7732 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 3.437 INCHES MINIMUM AND 3.469 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.802 INCHES MINIMUM AND 0.854 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 1.000 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM IN |
| Grip Diameter | 0.9971 INCHES MINIMUM AND 0.9985 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 14 |
| Material | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 1.8844 INCHES MINIMUM AND 2.0501 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| BACB30ABP16-49A | 5/9 Secondary reference U.S. Government activity |
| BACB30AB16-49A | 5/9 Secondary reference U.S. Government activity |
| BACB30LU16-42 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-436-7732 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-436-7732: Fastener Length: 3.437 INCHES MINIMUM AND 3.469 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.802 INCHES MINIMUM AND 0.854 INCHES MAXIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.