PartsTable TECHNICAL DATA SHEET
NSN 5305-00-431-8012Government record, cited

Screw, Assembled Washer5305-00-431-8012

NSN 5305-00-431-8012 · NIIN 004318012
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-431-8012 · 5305004318012 · NIIN 004318012 · 00-431-8012 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,assembled Washer — FSC 5305
  • Fastener Length: 0.750 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: AMS2400-1 ASSN STD 1ST TREATMENT RESPONSE OR AMS2402-1 ASSN STD 2ND TREATMENT RESPONSE OVERALL
  • Primary Washer Outside Diameter: 0.599 INCHES NOMINAL IN
  • Thread Length: 0.639 INCHES NOMINAL IN
  • Hardness Rating: 80.0 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
  • Material Document and Classification: SAE J429GR2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.312 INCHES IN
Identification
  • NSN: 5305-00-431-8012
  • NIIN: 004318012
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,assembled Washer, cataloged under National Stock Number 5305-00-431-8012, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-431-8012
Item NameScrew,assembled Washer
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Fastener Length0.750 INCHES NOMINAL IN
Surface Treatment Document and ClassificationAMS2400-1 ASSN STD 1ST TREATMENT RESPONSE OR AMS2402-1 ASSN STD 2ND TREATMENT RESPONSE OVERALL
Primary Washer Outside Diameter0.599 INCHES NOMINAL IN
Thread Length0.639 INCHES NOMINAL IN
Hardness Rating80.0 ROCKWELL B MINIMUM AND 100.0 ROCKWELL B MAXIMUM OVERALL
Material Document and ClassificationSAE J429GR2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.312 INCHES IN
Head StyleFLAT COUNTERSUNK
Primary Washer StyleCOUNTERSINK EXTERNAL TEETH
Thread DirectionRIGHT-HAND
Primary Washer Material Thickness0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OR ZINC OVERALL
Minimum Tensile Strength74000 POUNDS PER SQUARE INCH LBS
Minimum Yield Strength57000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleSLOT
Countersink Angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
Thread Class2A A
Thread Quantity Per Inch18
MaterialSTEEL OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Washer Quantity1
Head Diameter0.600 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
13218E0512-68 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-431-8012?

NSN 5305-00-431-8012 is a Screw,assembled Washer, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-00-431-8012?

Key specifications for 5305-00-431-8012: Fastener Length: 0.750 INCHES NOMINAL IN; Surface Treatment Document and Classification: AMS2400-1 ASSN STD 1ST TREATMENT RESPONSE OR AMS2402-1 ASSN STD 2ND TREATMENT RESPONSE OVERALL; Primary Washer Outside Diameter: 0.599 INCHES NOMINAL IN; Thread Length: 0.639 INCHES NOMINAL IN. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-431-8012 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com