The Screw,close Tolerance, cataloged under National Stock Number 5305-00-426-0093, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-426-0093 |
| Primary Part Number | HT7A19 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 1.828 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN |
| Thread Length | 0.536 INCHES MINIMUM AND 0.697 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.437 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN |
| Grip Diameter | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 431 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.888 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5305-00-426-0093 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-426-0093 has 2 manufacturer part numbers on file: HT7A19 (Fairchild Fasteners Europe - Vsd Gmbh), HT7A19 (Hi-Shear Corporation).
Key specifications for HT7A19: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 1.828 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.