The Screw,machine, cataloged under National Stock Number 5305-00-417-4956, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-417-4956 |
| Primary Part Number | AN5CH14A |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney |
| Status | ACTIVE |
| Fastener Length | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.699 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 3C STYLE |
| Screw Material | COPPER ALLOY |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Test Data Document | 36659-LC+72-1238 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Head Diameter | 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AN5CH14A | Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney (USA) |
| Reference | Meaning |
|---|---|
| FFS92 | 4/1 Identification reference U.S. Government activity |
| LS12906-62 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-417-4956 is a Screw,machine, manufactured by Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-417-4956 has 1 manufacturer part number on file: AN5CH14A (Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney).
Key specifications for AN5CH14A: Fastener Length: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.699 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.190 INCHES IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.