The Screw,close Tolerance, cataloged under National Stock Number 5305-00-411-6535, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-411-6535 |
| Primary Part Number | 66117H8-20 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Sps Technologies, Llc Dba PB Fasteners |
| Status | ACTIVE |
| Fastener Length | 1.883 INCHES MINIMUM AND 1.930 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MAC PS13145 FSC-76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.623 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN |
| Grip Diameter | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 1.007 INCHES MINIMUM AND 1.017 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 66117H8-20 PRIMARY | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HT195-8-20 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HT195-8-20 | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| 3M263-8-20 | 7/2 Vendor item drawing reference The Boeing Company Div Defense |
| HS2623-8Z20 | 5/9 Secondary reference U.S. Government activity |
| 66117H8-20 | 5/9 Secondary reference Sps Technologies Inc |
| 3M263-8-20 | 5/2 Secondary reference U.S. Government activity |
| 3M263-8-20 | 5/2 Secondary reference U.S. Government activity |
| HS2623-8Z20 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
NSN 5305-00-411-6535 is a Screw,close Tolerance, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-411-6535 has 3 manufacturer part numbers on file: 66117H8-20 (Sps Technologies, Llc Dba PB Fasteners), HT195-8-20 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), HT195-8-20 (Hi-Shear Corporation).
Key specifications for 66117H8-20: Fastener Length: 1.883 INCHES MINIMUM AND 1.930 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MAC PS13145 FSC-76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.623 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN; Hardness Rating: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.