The Screw,close Tolerance, cataloged under National Stock Number 5305-00-407-5472, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-407-5472 |
| Primary Part Number | AIC793-5-30 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company |
| Status | ACTIVE |
| Fastener Length | 2.210 INCHES MINIMUM AND 2.257 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.325 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN |
| Grip Diameter | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 2.100 INCHES MINIMUM AND 2.130 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.630 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| AIC793-5-30 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| VS2545T5F30T PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| Reference | Meaning |
|---|---|
| SFT22-5-30 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| C793-5-30 | 7/2 Vendor item drawing reference U.S. Government activity |
| SFT22-5-30 | 3/2 Design control — primary reference U.S. Government activity |
| VS2545T5F30T | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-407-5472 is a Screw,close Tolerance, manufactured by Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-407-5472 has 2 manufacturer part numbers on file: AIC793-5-30 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), VS2545T5F30T (Howmet Global Fastening Systems Inc).
Key specifications for AIC793-5-30: Fastener Length: 2.210 INCHES MINIMUM AND 2.257 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.325 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN; Hardness Rating: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.