The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-402-6258, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-402-6258 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Spline Minor Diameter | 0.080 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN |
| Head Height | 0.095 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN |
| Fastener Length | 0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN |
| Spline Width | 0.021 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN |
| Thread Length | 0.286 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN |
| Material Document and Classification | ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OVERALL |
| Spline Major Diameter | 0.097 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.099 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SIX SPLINE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 48 |
| Material | STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.154 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 61328050322 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-402-6258 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-402-6258: Spline Minor Diameter: 0.080 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN; Head Height: 0.095 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN; Fastener Length: 0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN; Spline Width: 0.021 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.