The Screw,machine, cataloged under National Stock Number 5305-00-384-3151, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-384-3151 |
| Primary Part Number | 180299PC3 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
| Status | ACTIVE |
| Fastener Length | 0.703 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN |
| Thread Length | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | COPPER ALLOY |
| Countersink Angle | 60.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 16 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.616 INCHES MINIMUM AND 0.622 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 180299PC3 PRIMARY | Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA) |
NSN 5305-00-384-3151 is a Screw,machine, manufactured by Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-384-3151 has 1 manufacturer part number on file: 180299PC3 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier).
Key specifications for 180299PC3: Fastener Length: 0.703 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN; Thread Length: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.375 INCHES IN; Head Style: FLAT COUNTERSUNK. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.