The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-365-8939, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-365-8939 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN |
| Fastener Length | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.421 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN |
| Hardness Rating | 80.0 ROCKWELL B NOMINAL OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Locking Feature | PELLET THREADS |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 30000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 303 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2680889-5 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5305-00-365-8939 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-365-8939: Width Across Flats: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN; Fastener Length: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.421 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.