PartsTable TECHNICAL DATA SHEET
NSN 5305-00-338-2929Government record, cited

Screw, Close Tolerance5305-00-338-2929

NSN 5305-00-338-2929 · NIIN 003382929 · Part number HT184-3-11
Hi-Shear Corporation · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 73197
Government record, cited
NSN 5305-00-338-2929 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-338-2929. Manufacturer of record part number: HT184-3-11.
Also searched as  5305-00-338-2929 · 5305003382929 · NIIN 003382929 · 00-338-2929 · FSC 5305 Screws · CAGE 73197 · HT184-3-11
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 32.0 MICROINCHES THREADS
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Fastener Length: 0.948 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
  • Hardness Rating: 40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
  • Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-00-338-2929
  • NIIN: 003382929
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: HT184-3-11
  • Manufacturer: Hi-Shear Corporation
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-00-338-2929, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-338-2929
Primary Part NumberHT184-3-11
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerHi-Shear Corporation
StatusACTIVE
Surface Finish32.0 MICROINCHES THREADS
Surface Finish32.0 MICROINCHES GRIP
Fastener Length0.948 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
Hardness Rating40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.190 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
Grip Diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength180000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHIGH-TORQUE
Countersink Angle100.0 DEGREES NOMINAL
Thread Class3A A
Thread Quantity Per Inch32
MaterialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
Thread Series DesignatorUNF
Head Diameter0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
HT184-3-11 PRIMARY Hi-Shear Corporation (USA)
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-338-2929?

NSN 5305-00-338-2929 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-338-2929?

NSN 5305-00-338-2929 has 1 manufacturer part number on file: HT184-3-11 (Hi-Shear Corporation).

What are the specifications of HT184-3-11?

Key specifications for HT184-3-11: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 0.948 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-338-2929 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com