The Screw,machine, cataloged under National Stock Number 5305-00-327-0643, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-327-0643 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.213 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES |
| Thread Length | 0.177 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 |
| Minimum Tensile Strength | 115000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 56 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 6130205-0214 | 3/2 Design control — primary reference U.S. Government activity |
| 61302050214 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-00-327-0643 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-327-0643: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.213 INCHES MINIMUM AND 0.228 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-S-763 FED SPEC ALL MATERIAL RESPONSES; Thread Length: 0.177 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.