The Setscrew, cataloged under National Stock Number 5305-00-317-4502, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-317-4502 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Point Diameter | 0.250 INCHES NOMINAL IN |
| Head Height | 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN |
| Point Length | 0.250 INCHES NOMINAL IN |
| Fastener Length | 1.750 INCHES NOMINAL IN |
| Thread Length | 1.500 INCHES MINIMUM IN |
| Hole Configuration Style | HEXAGON FLATS |
| Material Document and Classification | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 6300 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Point Style | DOG |
| Width Between Flats | 0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN |
| Internal Drive Style | W/O INTERNAL DRIVE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 102057-1232 | 3/9 Design control — primary reference Ground Support Engineering Inc |
NSN 5305-00-317-4502 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-317-4502: Point Diameter: 0.250 INCHES NOMINAL IN; Head Height: 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN; Point Length: 0.250 INCHES NOMINAL IN; Fastener Length: 1.750 INCHES NOMINAL IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.