The Setscrew, cataloged under National Stock Number 5305-00-293-5462, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-293-5462 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Point Diameter | 0.307 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN |
| Width Across Flats | 0.313 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN |
| Head Height | 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Point Length | 0.300 INCHES NOMINAL IN |
| Fastener Length | 0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN |
| Hardness Rating | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Point Style | DOG |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.550 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 29-48036-1 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-293-5462 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-293-5462: Point Diameter: 0.307 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN; Width Across Flats: 0.313 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN; Head Height: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Point Length: 0.300 INCHES NOMINAL IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.