The Setscrew, cataloged under National Stock Number 5305-00-282-5795, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-282-5795 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN |
| Fastener Length | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Thread Length | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | FULL DOG |
| Nondefinitive Spec/std Data | 3 TYPE AND 5 STYLE |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FFS103ANDTYPE3ANDSTYLE5 | 4/1 Identification reference U.S. Government activity |
| AN565C8H6 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-282-5795 is a Setscrew, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5305-00-285-3221. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-282-5795: Width Across Flats: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN; Fastener Length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN; Thread Length: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN; Hardness Rating: 46.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.