The Setscrew, cataloged under National Stock Number 5305-00-282-3133, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-282-3133 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Spline Minor Diameter | 0.055 INCHES NOMINAL IN |
| Fastener Length | 0.125 INCHES NOMINAL IN |
| Spline Width | 0.023 INCHES NOMINAL IN |
| Thread Length | 0.125 INCHES MAXIMUM IN |
| Hardness Rating | 50.0 ROCKWELL C MINIMUM OVERALL |
| Spline Major Diameter | 0.079 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | CUP |
| Minimum Tensile Strength | 75000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SIX SPLINE |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 328-0020-00 | 3/9 Design control — primary reference Bristol Babcock Inc Instruments-Systems Div Sub of Babcock Intl Inc |
NSN 5305-00-282-3133 is a Setscrew, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5305-00-680-6486. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-282-3133: Spline Minor Diameter: 0.055 INCHES NOMINAL IN; Fastener Length: 0.125 INCHES NOMINAL IN; Spline Width: 0.023 INCHES NOMINAL IN; Thread Length: 0.125 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.