The Setscrew, cataloged under National Stock Number 5305-00-281-1617, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-281-1617 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.270 INCHES MINIMUM AND 0.293 INCHES MAXIMUM IN |
| Point Length | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN |
| Fastener Length | 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN |
| Thread Length | 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN |
| Hardness Rating | 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | QQ-S-624,COMP 8640 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-624,COMP 8740 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-624,FS 8635 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-624,FS 8735 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-624,FS 4135 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-624,FS 4140 FED SPEC 6TH MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 4.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | SQUARE |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Width Between Flats | 0.362 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Internal Drive Style | W/O INTERNAL DRIVE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Hole Type | DRILLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| X3326 | 3/9 Design control — primary reference Kaitlin Corp |
| X3326 | 5/9 Secondary reference Teledyne Continental Motors Industrial Products Div Teledyne Industries Inc Sub of Teledyne Inc |
NSN 5305-00-281-1617 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-281-1617: Head Height: 0.270 INCHES MINIMUM AND 0.293 INCHES MAXIMUM IN; Point Length: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN; Fastener Length: 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN; Thread Length: 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.