The Screw,close Tolerance, cataloged under National Stock Number 5305-00-280-3340, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-280-3340 |
| Primary Part Number | HT4013-4-8X |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 0.888 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Grip Diameter | 0.2641 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.355 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HT4013-4-8X PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HT4013-4-8X PRIMARY | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| HT4013-4-8X | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| HT4013-4-8X | 5/9 Secondary reference Sps Technologies Inc Unbrako Div |
| ST3M605-4-8 | 7/2 Vendor item drawing reference The Boeing Company Div Defense |
| 7834W29P007 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| HT4013-4-8X | 5/9 Secondary reference U.S. Government activity |
| HT4013-4-8X | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-280-3340 is a Screw,close Tolerance, manufactured by Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-280-3340 has 2 manufacturer part numbers on file: HT4013-4-8X (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), HT4013-4-8X (Hi-Shear Corporation).
Key specifications for HT4013-4-8X: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 0.888 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.