The Screw,machine, cataloged under National Stock Number 5305-00-240-6541, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-240-6541 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 1.219 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN |
| Thread Length | 1.136 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 1 TYPE AND 10S STYLE |
| Screw Material | STEEL OR STEEL COMP 1109 OR STEEL COMP E52100 |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 24 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Screw Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS51849-79 | 2/2 Government specification standardization U.S. Government activity |
| FFS92 | 4/1 Identification reference U.S. Government activity |
NSN 5305-00-240-6541 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-240-6541: Head Height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 1.219 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN; Thread Length: 1.136 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.