PartsTable TECHNICAL DATA SHEET
NSN 5305-00-229-8801Government record, cited

Screw, Cap, Socket Head5305-00-229-8801

NSN 5305-00-229-8801 · NIIN 002298801 · Part number 73573-4-12C
Sps Technologies, Llc Dba PB Fasteners · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 56878
Government record, cited
NSN 5305-00-229-8801 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-229-8801. Manufacturer of record part number: 73573-4-12C.
Also searched as  5305-00-229-8801 · 5305002298801 · NIIN 002298801 · 00-229-8801 · FSC 5305 Screws · CAGE 56878 · 73573-4-12C · NAS1351C4-12 · AIC811-4-12 · AOL4166-411 · 965811-411
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
  • Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
  • Fastener Length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.649 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
  • Hardness Rating: 80.0 ROCKWELL B MINIMUM OVERALL
  • Material Document and Classification: 66 FED STD 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE OR 66 FED STD 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OR ASTM A493 ASSN STD 6TH MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-00-229-8801
  • NIIN: 002298801
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 73573-4-12C
  • Manufacturer: Sps Technologies, Llc Dba PB Fasteners
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-229-8801, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-229-8801
Primary Part Number73573-4-12C
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
ManufacturerSps Technologies, Llc Dba PB Fasteners
StatusACTIVE
Width Across Flats0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
Head Height0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Fastener Length0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.649 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Hardness Rating80.0 ROCKWELL B MINIMUM OVERALL
Material Document and Classification66 FED STD 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE OR 66 FED STD 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OR ASTM A493 ASSN STD 6TH MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength80000 POUNDS PER SQUARE INCH LBS
Minimum Yield Strength30000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Thread Class3A A
Test Data Document81348-FF-S-86C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch28
MaterialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
Thread Series DesignatorUNRF
Head Diameter0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-00-958-7667MS16996-23 POSSIBLE MATCH
SCREW,CAP,SOCKET HEAD
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
Cross-Reference Index
Part NumberManufacturer
73573-4-12C Sps Technologies, Llc Dba PB Fasteners (USA)
AIC811-4-12 Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA)
AOL4166-411 All Manufacturers, Inc. Dba Allied Harbor Aerospace Fasteners (USA)
Reference documents
ReferenceMeaning
NAS1351C4-12 3/2 Design control — primary reference
U.S. Government activity
965811-411 5/2 Secondary reference
U.S. Government activity
Related Parts
5305-00-958-7667POSSIBLE MATCH
SCREW,CAP,SOCKET HEAD
MS16996-23

Frequently Asked Questions

What is NSN 5305-00-229-8801?

NSN 5305-00-229-8801 is a Screw,cap,socket Head, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-229-8801?

NSN 5305-00-229-8801 has 3 manufacturer part numbers on file: 73573-4-12C (Sps Technologies, Llc Dba PB Fasteners), AIC811-4-12 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), AOL4166-411 (All Manufacturers, Inc. Dba Allied Harbor Aerospace Fasteners).

What NSN replaces 5305-00-229-8801?

1 possible match (shared part number, not a government interchangeability claim): 5305-00-958-7667. Verify interchangeability with system specifications before substitution.

What are the specifications of 73573-4-12C?

Key specifications for 73573-4-12C: Width Across Flats: 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN; Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Fastener Length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-229-8801 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com