PartsTable TECHNICAL DATA SHEET
NSN 5305-00-229-1329Government record, cited

Setscrew5305-00-229-1329

NSN 5305-00-229-1329 · NIIN 002291329
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-229-1329 · 5305002291329 · NIIN 002291329 · 00-229-1329 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Setscrew — FSC 5305
  • Point Diameter: 0.136 INCHES NOMINAL IN
  • Head Height: 0.137 INCHES MAXIMUM IN
  • Point Length: 0.125 INCHES NOMINAL IN
  • Fastener Length: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
  • Thread Length: 0.980 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
  • Material Document and Classification: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.190 INCHES IN
Identification
  • NSN: 5305-00-229-1329
  • NIIN: 002291329
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Setscrew, cataloged under National Stock Number 5305-00-229-1329, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-229-1329
Item NameSetscrew
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Point Diameter0.136 INCHES NOMINAL IN
Head Height0.137 INCHES MAXIMUM IN
Point Length0.125 INCHES NOMINAL IN
Fastener Length1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
Thread Length0.980 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
Material Document and ClassificationQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.190 INCHES IN
Head StyleROUND
Thread DirectionRIGHT-HAND
Point StyleDOG
Surface TreatmentOXIDE OVERALL
Internal Drive StyleCROSS RECESS TYPE 1
Thread Class2A A
Thread Quantity Per Inch32
MaterialCOPPER ALLOY OVERALL
Thread Series DesignatorUNF
Head Diameter0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 3
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5310-00-596-824595007 POSSIBLE MATCH
NUT,PLAIN,HEXAGON
Possible match (shared part number)Honeywell International Inc. Dba Honeywell International Div Aerospace - Tempe (west Warner Road)
8120-01-610-429995007 POSSIBLE MATCH
CYLINDER,COMPRESSED GAS
Possible match (shared part number)Ritchie Engineering Co Inc
5120-01-619-747895-007 POSSIBLE MATCH
SCREWDRIVER,FLAT TIP
Possible match (shared part number)Hii Unmanned Systems, Inc
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
9500-7 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5310-00-596-8245POSSIBLE MATCH
NUT,PLAIN,HEXAGON
95007
8120-01-610-4299POSSIBLE MATCH
CYLINDER,COMPRESSED GAS
95007
5120-01-619-7478POSSIBLE MATCH
SCREWDRIVER,FLAT TIP
95-007

Frequently Asked Questions

What is NSN 5305-00-229-1329?

NSN 5305-00-229-1329 is a Setscrew, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-00-229-1329?

3 possible matches (shared part number, not a government interchangeability claim): 5310-00-596-8245, 8120-01-610-4299, 5120-01-619-7478. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-00-229-1329?

Key specifications for 5305-00-229-1329: Point Diameter: 0.136 INCHES NOMINAL IN; Head Height: 0.137 INCHES MAXIMUM IN; Point Length: 0.125 INCHES NOMINAL IN; Fastener Length: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-229-1329 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com