The Setscrew, cataloged under National Stock Number 5305-00-226-3246, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-226-3246 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN |
| Fastener Length | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-S-325 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-17711 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Thread Length | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN |
| Hardness Rating | 47.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | HEADLESS (SETSCREW) |
| Thread Direction | RIGHT-HAND |
| Point Style | HALF DOG |
| Surface Treatment | ZINC AND CHROMATE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4037 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7250-1000 | 3/9 Design control — primary reference Genrad Inc |
| 7250-1000 | C/1 Advisory reference — outside the item-of-supply concept Iet Labs Inc |
NSN 5305-00-226-3246 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-226-3246: Width Across Flats: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN; Fastener Length: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-S-325 FED SPEC 1ST TREATMENT RESPONSE AND MIL-C-17711 MIL SPEC 2ND TREATMENT RESPONSE OVERALL; Thread Length: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.