The Screw,close Tolerance, cataloged under National Stock Number 5305-00-211-9229, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-211-9229 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.856 INCHES MINIMUM AND 0.903 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Thread Length | 0.534 INCHES MINIMUM AND 0.601 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.016 INCHES NOMINAL FIRST HOLE IN |
| Material Document and Classification | SPS-M-107 FSCM 56878 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Grip Diameter | 0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.563 INCHES MINIMUM AND 0.595 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.698 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 106706H6-5 | 5/9 Secondary reference Sps Technologies Inc |
| HT8171-6-5 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| HT8171H6-5 | 3/2 Design control — primary reference U.S. Government activity |
| 106706H6-5 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| GB510BC6-5 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
NSN 5305-00-211-9229 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-211-9229: Fastener Length: 0.856 INCHES MINIMUM AND 0.903 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL; Thread Length: 0.534 INCHES MINIMUM AND 0.601 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.016 INCHES NOMINAL FIRST HOLE IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.