PartsTable TECHNICAL DATA SHEET
NSN 5305-00-211-9039Government record, cited

Screw, Close Tolerance5305-00-211-9039

NSN 5305-00-211-9039 · NIIN 002119039 · Part number NAS1206-23D
Eriks Southwest Inc Dba Montclair Enterprises · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 30889
Government record, cited
NSN 5305-00-211-9039 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-211-9039. Manufacturer of record part number: NAS1206-23D.
Also searched as  5305-00-211-9039 · 5305002119039 · NIIN 002119039 · 00-211-9039 · FSC 5305 Screws · CAGE 30889 · NAS1206-23D
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Fastener Length: 1.814 INCHES MINIMUM AND 1.844 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Shank Unthreaded Hole Diameter: 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN
  • Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.375 INCHES IN
Identification
  • NSN: 5305-00-211-9039
  • NIIN: 002119039
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: NAS1206-23D
  • Manufacturer: Eriks Southwest Inc Dba Montclair Enterprises
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-00-211-9039, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Eriks Southwest Inc Dba Montclair Enterprises. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-211-9039
Primary Part NumberNAS1206-23D
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerEriks Southwest Inc Dba Montclair Enterprises
StatusACTIVE
Fastener Length1.814 INCHES MINIMUM AND 1.844 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Shank Unthreaded Hole Diameter0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.375 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1206 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM IN
Grip Diameter0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE 1
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch24
MaterialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
Thread Series DesignatorUNF
Distance From Head Largest Bearing Surface to Shank Hole Center1.684 INCHES MINIMUM AND 1.734 INCHES MAXIMUM FIRST HOLE IN
Head Diameter0.704 INCHES MINIMUM AND 0.762 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
NAS1206-23D PRIMARY Eriks Southwest Inc Dba Montclair Enterprises (USA)
NAS1206-23D PRIMARY Apcom Inc (USA)
NAS1206-23D PRIMARY Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN)
NAS1206-23D Nor-Cal Supply Co (USA)
NAS1206-23D PRIMARY Hi-Shear Corporation (USA)
Reference documents
ReferenceMeaning
NAS1206-23D 3/2 Design control — primary reference
U.S. Government activity
NAS1206-23D 5/9 Secondary reference
Sps Technologies, Llc Dba PB Fasteners
NAS1206-23D 3/2 Design control — primary reference
U.S. Government activity
NAS1206-23D 5/9 Secondary reference
U.S. Government activity
NAS1206-23D 5/9 Secondary reference
F and C Sales Inc
NAS1206-23D 5/9 Secondary reference
Air Industries Co Inc
NAS1206-23D 5/9 Secondary reference
Lawrence Engineering and Supply Inc
NAS1206-23D 5/9 Secondary reference
Collins Engineering Corp
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-211-9039?

NSN 5305-00-211-9039 is a Screw,close Tolerance, manufactured by Eriks Southwest Inc Dba Montclair Enterprises, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-211-9039?

NSN 5305-00-211-9039 has 5 manufacturer part numbers on file: NAS1206-23D (Eriks Southwest Inc Dba Montclair Enterprises), NAS1206-23D (Apcom Inc), NAS1206-23D (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), NAS1206-23D (Nor-Cal Supply Co), NAS1206-23D (Hi-Shear Corporation).

What are the specifications of NAS1206-23D?

Key specifications for NAS1206-23D: Fastener Length: 1.814 INCHES MINIMUM AND 1.844 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-211-9039 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com