The Screw,externally Relieved Body, cataloged under National Stock Number 5305-00-208-1599, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-208-1599 |
| Item Name | Screw,externally Relieved Body |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN |
| Thread Length | 0.500 INCHES MINIMUM IN |
| Material Document and Classification | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First Diameter From Head | 0.250 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Distance From Largest Bearing Surface of Head to End of First Diameter | 0.438 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN |
| Externally Relieved Body Diameter Quantity | 1 |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 82.0 DEGREES NOMINAL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 303SE OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.609 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| A10496 | 3/9 Design control — primary reference Incom Intl Inc Morse Controls Div |
| A10496 | C/1 Advisory reference — outside the item-of-supply concept Marine Acquisition (us) Incorporated Div Prime Line Industrial Controls |
NSN 5305-00-208-1599 is a Screw,externally Relieved Body, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-208-1599: Fastener Length: 1.484 INCHES MINIMUM AND 1.516 INCHES MAXIMUM IN; Thread Length: 0.500 INCHES MINIMUM IN; Material Document and Classification: MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL; First Diameter From Head: 0.250 INCHES NOMINAL IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.