PartsTable TECHNICAL DATA SHEET
NSN 5305-00-207-7041Government record, cited

Setscrew5305-00-207-7041

NSN 5305-00-207-7041 · NIIN 002077041 · Part number PGF9160
Dana Off Highway Products, Llc · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 77237
Government record, cited
NSN 5305-00-207-7041 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-207-7041. Manufacturer of record part number: PGF9160.
Also searched as  5305-00-207-7041 · 5305002077041 · NIIN 002077041 · 00-207-7041 · FSC 5305 Screws · CAGE 77237 · PGF9160
Nearby stock numbers  ·
Features
  • Setscrew — FSC 5305
  • Head Height: 0.156 INCHES NOMINAL IN
  • Point Length: 0.163 INCHES NOMINAL IN
  • Fastener Length: 0.719 INCHES NOMINAL IN
  • Thread Length: 0.494 INCHES MINIMUM IN
  • Hole Configuration Style: SQUARE FLATS
  • Material Document and Classification: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
  • Point Chamfer Angle: 60.0 DEGREES NOMINAL
Identification
  • NSN: 5305-00-207-7041
  • NIIN: 002077041
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: PGF9160
  • Manufacturer: Dana Off Highway Products, Llc
General Description

The Setscrew, cataloged under National Stock Number 5305-00-207-7041, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Dana Off Highway Products, Llc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-207-7041
Primary Part NumberPGF9160
Item NameSetscrew
FSC / FSG5305 / 53 — Screws
ManufacturerDana Off Highway Products, Llc
StatusACTIVE
Head Height0.156 INCHES NOMINAL IN
Point Length0.163 INCHES NOMINAL IN
Fastener Length0.719 INCHES NOMINAL IN
Thread Length0.494 INCHES MINIMUM IN
Hole Configuration StyleSQUARE FLATS
Material Document and ClassificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Point Chamfer Angle60.0 DEGREES NOMINAL
Nominal Thread Diameter0.375 INCHES IN
Features ProvidedCASEHARDENED
Head StyleSQUARE
Thread DirectionRIGHT-HAND
Point StyleFLAT
Width Between Flats0.375 INCHES NOMINAL IN
Internal Drive StyleW/O INTERNAL DRIVE
Thread Class3A A
Thread Quantity Per Inch24
MaterialSTEEL COMP 1020 OVERALL
Hole Quantity1
Thread Series DesignatorUNF
Hole TypeDRILLED
Hole Diameter0.078 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
PGF9160 PRIMARY Dana Off Highway Products, Llc (USA)
Reference documents
ReferenceMeaning
PGF9160 3/9 Design control — primary reference
Vme Americas Inc Sub of Vme Group N V
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-207-7041?

NSN 5305-00-207-7041 is a Setscrew, manufactured by Dana Off Highway Products, Llc, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-207-7041?

NSN 5305-00-207-7041 has 1 manufacturer part number on file: PGF9160 (Dana Off Highway Products, Llc).

What are the specifications of PGF9160?

Key specifications for PGF9160: Head Height: 0.156 INCHES NOMINAL IN; Point Length: 0.163 INCHES NOMINAL IN; Fastener Length: 0.719 INCHES NOMINAL IN; Thread Length: 0.494 INCHES MINIMUM IN. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-207-7041 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com