PartsTable TECHNICAL DATA SHEET
NSN 5305-00-207-5957Government record, cited

Setscrew5305-00-207-5957

NSN 5305-00-207-5957 · NIIN 002075957
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-207-5957 · 5305002075957 · NIIN 002075957 · 00-207-5957 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Setscrew — FSC 5305
  • Point Diameter: 0.202 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
  • Head Height: 0.160 INCHES NOMINAL IN
  • Point Length: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
  • Fastener Length: 0.550 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: F-1.20 FSCM 81205 MFR REF SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
  • Hole Configuration Style: HEXAGON FLATS
Identification
  • NSN: 5305-00-207-5957
  • NIIN: 002075957
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Setscrew, cataloged under National Stock Number 5305-00-207-5957, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-207-5957
Item NameSetscrew
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Point Diameter0.202 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
Head Height0.160 INCHES NOMINAL IN
Point Length0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
Fastener Length0.550 INCHES NOMINAL IN
Surface Treatment Document and ClassificationF-1.20 FSCM 81205 MFR REF SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.420 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
Hole Configuration StyleHEXAGON FLATS
Material Document and ClassificationMIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
Point Chamfer Angle60.0 DEGREES NOMINAL
Nominal Thread Diameter0.250 INCHES IN
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Point StyleFLAT
Width Between Flats0.433 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OVERALL
Minimum Tensile Strength125000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleW/O INTERNAL DRIVE
Thread Class2A A
Thread Quantity Per Inch28
MaterialSTEEL OVERALL
Hole Quantity1
Thread Series DesignatorUNF
Hole TypeDRILLED
Hole Diameter0.046 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
3-56849-1 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-207-5957?

NSN 5305-00-207-5957 is a Setscrew, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-00-207-5957?

Key specifications for 5305-00-207-5957: Point Diameter: 0.202 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN; Head Height: 0.160 INCHES NOMINAL IN; Point Length: 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN; Fastener Length: 0.550 INCHES NOMINAL IN. 24 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-207-5957 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com