The Setscrew, cataloged under National Stock Number 5305-00-207-5176, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Rolls-Royce Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-207-5176 |
| Primary Part Number | 194884 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Rolls-Royce Corporation |
| Status | ACTIVE |
| Point Diameter | 0.154 INCHES MAXIMUM IN |
| Width Across Flats | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Head Height | 0.242 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN |
| Point Length | 0.594 INCHES NOMINAL IN |
| Fastener Length | 0.906 INCHES NOMINAL IN |
| Thread Length | 0.250 INCHES MINIMUM IN |
| Hardness Rating | 25.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 45.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 155000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 416F OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 194884 PRIMARY | Rolls-Royce Corporation (USA) |
| Reference | Meaning |
|---|---|
| 194884 | 3/9 Design control — primary reference Honeywell International Inc Div Aerospace-South Bend (bendix Dr) |
NSN 5305-00-207-5176 is a Setscrew, manufactured by Rolls-Royce Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-207-5176 has 1 manufacturer part number on file: 194884 (Rolls-Royce Corporation).
Key specifications for 194884: Point Diameter: 0.154 INCHES MAXIMUM IN; Width Across Flats: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Head Height: 0.242 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN; Point Length: 0.594 INCHES NOMINAL IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.