PartsTable TECHNICAL DATA SHEET
NSN 5305-00-207-1868Government record, cited

Screw, Machine5305-00-207-1868

NSN 5305-00-207-1868 · NIIN 002071868
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-207-1868 · 5305002071868 · NIIN 002071868 · 00-207-1868 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Screw Surface Treatment: CADMIUM
  • Fastener Length: 2.516 INCHES MINIMUM AND 2.561 INCHES MAXIMUM IN
  • Screw Material Document and Classification: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE
  • Thread Length: 0.314 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
  • Nominal Thread Diameter: 0.164 INCHES IN
  • Head Style: FLAT COUNTERSUNK
Identification
  • NSN: 5305-00-207-1868
  • NIIN: 002071868
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,machine, cataloged under National Stock Number 5305-00-207-1868, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-207-1868
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Screw Surface TreatmentCADMIUM
Fastener Length2.516 INCHES MINIMUM AND 2.561 INCHES MAXIMUM IN
Screw Material Document and ClassificationMIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE
Thread Length0.314 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
Nominal Thread Diameter0.164 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS517 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Screw MaterialSTEEL COMP 8630 OR STEEL COMP 4037
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleCROSS RECESS TYPE II
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch32
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Head Diameter0.287 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
Screw Surface Treatment Document and ClassificationQQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS517-2-34 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-00-207-1868?

NSN 5305-00-207-1868 is a Screw,machine, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-00-207-1868?

Key specifications for 5305-00-207-1868: Screw Surface Treatment: CADMIUM; Fastener Length: 2.516 INCHES MINIMUM AND 2.561 INCHES MAXIMUM IN; Screw Material Document and Classification: MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE; Thread Length: 0.314 INCHES MINIMUM AND 0.451 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-207-1868 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com