The Screw,machine, cataloged under National Stock Number 5305-00-206-5331, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is L3 Technologies, Inc. Div L3 Keo. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-206-5331 |
| Primary Part Number | P1416-8 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | L3 Technologies, Inc. Div L3 Keo |
| Status | ACTIVE |
| Fastener Length | 0.214 INCHES NOMINAL IN |
| Screw Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.214 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 303SE |
| Minimum Tensile Strength | 75000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Countersink Angle | 60.0 DEGREES NOMINAL |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 48 |
| Thread Series Designator | UNF |
| Head Diameter | 0.179 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5305-00-206-5331 is a Screw,machine, manufactured by L3 Technologies, Inc. Div L3 Keo, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-206-5331 has 2 manufacturer part numbers on file: P1416-8 (L3 Technologies, Inc. Div L3 Keo), P1416PC8 (L3 Technologies, Inc. Div L3 Keo).
Key specifications for P1416-8: Fastener Length: 0.214 INCHES NOMINAL IN; Screw Material Document and Classification: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.214 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.112 INCHES IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.