PartsTable TECHNICAL DATA SHEET
NSN 5305-00-202-0322Government record, cited

Screw, Cap, Hexagon Head5305-00-202-0322

NSN 5305-00-202-0322 · NIIN 002020322
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-202-0322 · 5305002020322 · NIIN 002020322 · 00-202-0322 · FSC 5305 Screws · F-F-S-85 · MS51095-419
Nearby stock numbers  ·
Features
  • Screw,cap,hexagon Head — FSC 5305
  • Surface Finish: 63.0 MICROINCHES THREADS
  • Head Height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
  • Fastener Length: 2.656 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Thread Length: 1.250 INCHES MINIMUM IN
  • Hardness Rating: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
Identification
  • NSN: 5305-00-202-0322
  • NIIN: 002020322
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-00-202-0322, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-202-0322
Item NameScrew,cap,hexagon Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Surface Finish63.0 MICROINCHES THREADS
Head Height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
Fastener Length2.656 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Thread Length1.250 INCHES MINIMUM IN
Hardness Rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
Hole Configuration StyleHEXAGON FLATS
Material Document and ClassificationSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.500 INCHES IN
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Departure From Cited DesignatorAS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Width Between Flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Nondefinitive Spec/std Data2 TYPE AND 10P STYLE AND 5 GRADE
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength120000 POUNDS PER SQUARE INCH LBS
Thread Class2A A
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch13
MaterialSTEEL OVERALL
Hole Quantity1
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Hole TypeDRILLED
Hole Diameter0.094 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-01-497-7896 POSSIBLE MATCH
SCREW,CAP,HEXAGON HEAD
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
F-F-S-85 4/1 Identification reference
U.S. Government activity
MS51095-419 4/1 Identification reference
U.S. Government activity
Related Parts
5305-01-497-7896POSSIBLE MATCH
SCREW,CAP,HEXAGON HEAD

Frequently Asked Questions

What is NSN 5305-00-202-0322?

NSN 5305-00-202-0322 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-00-202-0322?

1 possible match (shared part number, not a government interchangeability claim): 5305-01-497-7896. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-00-202-0322?

Key specifications for 5305-00-202-0322: Surface Finish: 63.0 MICROINCHES THREADS; Head Height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN; Fastener Length: 2.656 INCHES MINIMUM AND 2.750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL. 25 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-202-0322 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com