PartsTable TECHNICAL DATA SHEET
NSN 5305-00-186-4244Government record, cited

Screw, Cap, Socket Head5305-00-186-4244

NSN 5305-00-186-4244 · NIIN 001864244
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-00-186-4244 · 5305001864244 · NIIN 001864244 · 00-186-4244 · FSC 5305 Screws · MS24677-164 · MS24677-164 · FFS86REVC
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 0.750 INCHES MINIMUM AND 0.757 INCHES MAXIMUM IN
  • Head Height: 0.988 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
  • Fastener Length: 3.150 INCHES MINIMUM AND 3.250 INCHES MAXIMUM IN
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Thread Length: 2.900 INCHES MINIMUM AND 3.250 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
  • Nominal Thread Diameter: 1.000 INCHES IN
Identification
  • NSN: 5305-00-186-4244
  • NIIN: 001864244
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-186-4244, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-186-4244
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Width Across Flats0.750 INCHES MINIMUM AND 0.757 INCHES MAXIMUM IN
Head Height0.988 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
Fastener Length3.150 INCHES MINIMUM AND 3.250 INCHES MAXIMUM IN
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Thread Length2.900 INCHES MINIMUM AND 3.250 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
Nominal Thread Diameter1.000 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Departure From Cited DesignatorAS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Nondefinitive Spec/std Data6 TYPE
Minimum Tensile Strength170000 POUNDS PER SQUARE INCH LBS
Minimum Yield Strength130000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Thread Class3A A
Thread Quantity Per Inch8
MaterialSTEEL OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Head Diameter1.479 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-00-187-9934 POSSIBLE MATCH
SCREW,CAP,SOCKET HEAD
Possible match (shared part number)
5305-01-292-7785 POSSIBLE MATCH
SCREW,CAP,HEXAGON HEAD
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MS24677-164 3/2 Design control — primary reference
U.S. Government activity
MS24677-164 5/9 Secondary reference
U.S. Government activity
FFS86REVC 4/1 Identification reference
U.S. Government activity
Related Parts
5305-00-187-9934POSSIBLE MATCH
SCREW,CAP,SOCKET HEAD
5305-01-292-7785POSSIBLE MATCH
SCREW,CAP,HEXAGON HEAD

Frequently Asked Questions

What is NSN 5305-00-186-4244?

NSN 5305-00-186-4244 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-00-186-4244?

2 possible matches (shared part number, not a government interchangeability claim): 5305-00-187-9934, 5305-01-292-7785. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-00-186-4244?

Key specifications for 5305-00-186-4244: Width Across Flats: 0.750 INCHES MINIMUM AND 0.757 INCHES MAXIMUM IN; Head Height: 0.988 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN; Fastener Length: 3.150 INCHES MINIMUM AND 3.250 INCHES MAXIMUM IN; Special Test Features: SPECIAL QUALITY CONTROL TESTING. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-186-4244 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com