PartsTable TECHNICAL DATA SHEET
NSN 5305-00-185-0718Government record, cited

Screw, Cap, Socket Head5305-00-185-0718

NSN 5305-00-185-0718 · NIIN 001850718 · Part number 450512
Cal-West Machining · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 0NM27
Government record, cited
NSN 5305-00-185-0718 — this item is cataloged by the U.S. Government under National Stock Number 5305-00-185-0718. Manufacturer of record part number: 450512.
Also searched as  5305-00-185-0718 · 5305001850718 · NIIN 001850718 · 00-185-0718 · FSC 5305 Screws · CAGE 0NM27 · 450512 · 72104 · NAS1352-4-24
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
  • Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
  • Fastener Length: 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 1.000 INCHES MINIMUM IN
  • Hardness Rating: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
  • Nominal Thread Diameter: 0.250 INCHES IN
Identification
  • NSN: 5305-00-185-0718
  • NIIN: 001850718
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 450512
  • Manufacturer: Cal-West Machining
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-185-0718, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Cal-West Machining. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 4 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-00-185-0718
Primary Part Number450512
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
ManufacturerCal-West Machining
StatusACTIVE
Width Across Flats0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
Head Height0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Fastener Length1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationMIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length1.000 INCHES MINIMUM IN
Hardness Rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
ColorBLACK OVERALL
Surface TreatmentOXIDE OVERALL
Minimum Tensile Strength170000 POUNDS PER SQUARE INCH LBS
Minimum Yield Strength150000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Thread Class3A A
Thread Quantity Per Inch20
MaterialSTEEL OVERALL
Thread Series DesignatorUNRC
Head Diameter0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 4
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5895-00-450-5750SM-D-2015831-2 POSSIBLE MATCH
CASE,ELECTRONIC COMMUNICATIONS E
Possible match (shared part number)Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
5825-00-545-172672104 POSSIBLE MATCH
SHAFT,MAIN ANTENNA,
Possible match (shared part number)L3harris Technologies, Inc Div Space & Airborne Systems
5307-01-421-046831015N PC. NO. 22A POSSIBLE MATCH
STUD,PLAIN
Possible match (shared part number)Leslie Controls, Inc. Dba Leslie Controls Inc
5935-01-595-1447450512 POSSIBLE MATCH
CONNECTOR,PLUG,ELECTRICAL
Possible match (shared part number)Technology Dynamics, Inc. Dba Mid-Eastern Industries Division
Cross-Reference Index
Part NumberManufacturer
450512 Cal-West Machining (USA)
Reference documents
ReferenceMeaning
72104 C/1 Advisory reference — outside the item-of-supply concept
H-K Connecticut Holding Company
NAS1352-4-24 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5895-00-450-5750POSSIBLE MATCH
CASE,ELECTRONIC COMMUNICATIONS E
SM-D-2015831-2
5825-00-545-1726POSSIBLE MATCH
SHAFT,MAIN ANTENNA,
72104
5307-01-421-0468POSSIBLE MATCH
STUD,PLAIN
31015N PC. NO. 22A
5935-01-595-1447POSSIBLE MATCH
CONNECTOR,PLUG,ELECTRICAL
450512

Frequently Asked Questions

What is NSN 5305-00-185-0718?

NSN 5305-00-185-0718 is a Screw,cap,socket Head, manufactured by Cal-West Machining, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-00-185-0718?

NSN 5305-00-185-0718 has 1 manufacturer part number on file: 450512 (Cal-West Machining).

What NSN replaces 5305-00-185-0718?

4 possible matches (shared part number, not a government interchangeability claim): 5895-00-450-5750, 5825-00-545-1726, 5307-01-421-0468. Verify interchangeability with system specifications before substitution.

What are the specifications of 450512?

Key specifications for 450512: Width Across Flats: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Fastener Length: 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-00-185-0718 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com