The Screw,machine, cataloged under National Stock Number 5305-00-182-9582, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-182-9582 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN |
| Thread Length | 0.126 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 1 TYPE AND 5S STYLE |
| Screw Material | STEEL |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 64 |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Head Hole Configuration Style | ROUND |
| Hole Diameter | 0.031 INCHES NOMINAL IN |
| Head Diameter | 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS35266-2 | 2/2 Government specification standardization U.S. Government activity |
| FFS92 | 4/1 Identification reference U.S. Government activity |
NSN 5305-00-182-9582 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-182-9582: Head Height: 0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN; Thread Length: 0.126 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.