The Screw,machine, cataloged under National Stock Number 5305-00-182-6786, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-182-6786 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN |
| Thread Length | 0.430 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.099 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL CORROSION RESISTING |
| Internal Drive Style | SLOT |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 48 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.171 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| N58P7009 | 3/2 Design control — primary reference U.S. Government activity |
| FF-S-92 TY I ST 2S | 4/1 Identification reference U.S. Government activity |
NSN 5305-00-182-6786 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5305-00-282-2273. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-00-182-6786: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN; Thread Length: 0.430 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.099 INCHES IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.