The Screw,wood, cataloged under National Stock Number 5305-00-180-1631, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Federal Specifications Promulgated by General Services Administration Washington DC. Government technical data includes 9 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 9 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-180-1631 |
| Primary Part Number | FF-S-111D |
| Item Name | Screw,wood |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Federal Specifications Promulgated by General Services Administration Washington DC |
| Status | ACTIVE |
| Material | COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL |
| Fastener Length | 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-B-613 AL 260 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 AL 260 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 AL 268 FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 AL 268 FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-321 AL 270 FED SPEC 3RD MATERIAL RESPONSE OVERALL |
| Nonmachine Nominal Thread Diameter | 0.086 INCHES IN |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Head Style | FLAT COUNTERSUNK |
| Nonmachine Thread Style | GIMLET POINT (TYPE A, AB OR BA) |
| Head Diameter | 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| FF-S-111D | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
| MS35492-924 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| FFS111ANDSTYLE2 | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
| AN550B2R6 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
NSN 5305-00-180-1631 is a Screw,wood, manufactured by Federal Specifications Promulgated by General Services Administration Washington DC, classified under FSC 5305 (No Item Name Available). Status: active.
NSN 5305-00-180-1631 has 4 cross-referenced part numbers: FF-S-111D (Federal Specifications Promulgated by General Services Administration Washington DC), MS35492-924 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), FFS111ANDSTYLE2 (Federal Specifications Promulgated by General Services Administration Washington DC), AN550B2R6 (Aeronautical Standards Group Dept of Navy and Air Force).
There are 9 known substitutes for 5305-00-180-1631: 5305-00-164-6953, 5305-00-180-0610, 5305-00-180-1526 and 6 more. Verify interchangeability with system specifications before substitution.
Key specifications for FF-S-111D: Material: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL; Fastener Length: 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Material Document and Classification: QQ-B-613 AL 260 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 AL 260 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 AL 268 FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 AL 268 FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-321 AL 270 FED SPEC 3RD MATERIAL RESPONSE OVERALL; Nonmachine Nominal Thread Diameter: 0.086 INCHES IN. 9 total characteristics are documented in the Federal Logistics Information System.