The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-172-7083, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-172-7083 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.188 INCHES NOMINAL IN |
| Head Height | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Fastener Length | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE THREADS |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Thread Length | 0.634 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN |
| Hardness Rating | 80.0 ROCKWELL B MINIMUM OVERALL |
| Criticality Code Justification | ZZZW |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Departure From Cited Designator | AS MODIFIED BY THD CLASS AND FINISH |
| Departure From Cited Document | MATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| Nondefinitive Spec/std Data | 6 TYPE |
| Surface Treatment | CHROMIUM THREADS |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 30000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 2A A |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | Y |
| Reference | Meaning |
|---|---|
| FFS86 | 4/1 Identification reference U.S. Government activity |
NSN 5305-00-172-7083 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-172-7083: Width Across Flats: 0.188 INCHES NOMINAL IN; Head Height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Fastener Length: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE THREADS. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.