The Setscrew, cataloged under National Stock Number 5305-00-168-9072, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-168-9072 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Point Diameter | 0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN |
| Head Height | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN |
| Point Length | 0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN |
| Fastener Length | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | F+92 FSCM 76823 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.268 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| Material Document and Classification | MIL-S-6758,F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Point Chamfer Angle | 90.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | PAN |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 4130 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 14-50898-1 | C/1 Advisory reference — outside the item-of-supply concept Northrop Grumman Technical Services, Inc. Dba Defense Systems Sector |
| 14-50898-1 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Northrop Grumman Aeronautics Systems |
NSN 5305-00-168-9072 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-168-9072: Point Diameter: 0.119 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN; Head Height: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN; Point Length: 0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN; Fastener Length: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.