The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-152-6415, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-152-6415 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN |
| Fastener Length | 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.588 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-S-634 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-637 FED SPEC 2ND MATERIAL RESPONSE OR 66 FED STD 3RD MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | PAN |
| Thread Direction | RIGHT-HAND |
| Locking Feature | STRIP THREADS |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2585164-286 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-152-6415 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-152-6415: Head Height: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN; Fastener Length: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 1.588 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.