The Screw,close Tolerance, cataloged under National Stock Number 5305-00-151-8641, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Div Tridair Products. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-151-8641 |
| Primary Part Number | CA2630-0425 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Howmet Global Fastening Systems Inc. Div Tridair Products |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES GRIP |
| Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| Head Height | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| Fastener Length | 1.981 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN |
| Thread Length | 0.278 INCHES MINIMUM AND 0.329 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.081 INCHES NOMINAL FIRST HOLE IN |
| Material Document and Classification | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Width Between Flats | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN |
| Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 3A A |
| Material | STEEL COMP 8740 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| CA2630-0425 PRIMARY | Howmet Global Fastening Systems Inc. Div Tridair Products (USA) |
| Reference | Meaning |
|---|---|
| AS108-04-25 | 3/2 Design control — primary reference U.S. Government activity |
| VP1119-4-25 | 3/2 Design control — primary reference U.S. Government activity |
| GB511AE4-25 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
NSN 5305-00-151-8641 is a Screw,close Tolerance, manufactured by Howmet Global Fastening Systems Inc. Div Tridair Products, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-151-8641 has 1 manufacturer part number on file: CA2630-0425 (Howmet Global Fastening Systems Inc. Div Tridair Products).
Key specifications for CA2630-0425: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN; Fastener Length: 1.981 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.