The Setscrew, cataloged under National Stock Number 5305-00-151-6893, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-151-6893 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Point Diameter | 0.081 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN |
| Head Height | 0.081 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN |
| Point Length | 0.130 INCHES NOMINAL IN |
| Fastener Length | 0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.271 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| Point Chamfer Angle | 45.0 DEGREES MINIMUM |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Point Style | CHAMFER DOG |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 303SE OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5305001516893 | 6/9 Informative reference only E.c.a Etablissement Central Des Approvisionnements Des Forces Armees Royales |
| SMB413788 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-151-6893 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-151-6893: Point Diameter: 0.081 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN; Head Height: 0.081 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN; Point Length: 0.130 INCHES NOMINAL IN; Fastener Length: 0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.