The Screw,cap,socket Head, cataloged under National Stock Number 5305-00-151-6145, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-151-6145 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Spline Minor Diameter | 0.080 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN |
| Head Height | 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN |
| Fastener Length | 0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN |
| Spline Width | 0.021 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN |
| Thread Length | 0.292 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN |
| Material Document and Classification | 66,COMP 18-8 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Spline Major Diameter | 0.097 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SIX SPLINE |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 56 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 7600510-16 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-00-151-6145 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-151-6145: Spline Minor Diameter: 0.080 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN; Head Height: 0.083 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN; Fastener Length: 0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN; Spline Width: 0.021 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.