The Screw,machine, cataloged under National Stock Number 5305-00-151-2198, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-151-2198 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE |
| Thread Length | 0.146 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL OR STEEL COMP 1010 |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 48 |
| Thread Series Designator | UNF |
| Head Diameter | 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FFS92ANDTYPE1ANDSTYLE4S | 4/1 Identification reference U.S. Government activity |
| AN501-4-3 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-00-151-2198 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-00-151-2198: Head Height: 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM; Fastener Length: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.