The Screw,machine, cataloged under National Stock Number 5305-00-151-0387, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-151-0387 |
| Primary Part Number | AN500A6-8 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | ACTIVE |
| Hole Quantity | 1 |
| Head Height | 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN |
| Thread Length | 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Head Style | FILLISTER |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Screw Material | STEEL OR STEEL COMP 1010 |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Thread Quantity Per Inch | 32 |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Thread Direction | RIGHT-HAND |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Fastener Length | 0.500 INCHES NOMINAL IN |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Screw Material Document and Classification | QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE |
| Thread Class | 2A A |
| Head Diameter | 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM |
| Head Hole Configuration Style | ROUND |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
NSN 5305-00-151-0387 is a Screw,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5305 (No Item Name Available). Status: active.
NSN 5305-00-151-0387 has 2 cross-referenced part numbers: AN500A6-8 (Aeronautical Standards Group Dept of Navy and Air Force), FFS92 (Federal Specifications Promulgated by General Services Administration Washington DC).
There is 1 known substitute for 5305-00-151-0387: 5305-00-579-2139. Verify interchangeability with system specifications before substitution.
Key specifications for AN500A6-8: Hole Quantity: 1; Head Height: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN; Thread Length: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Head Style: FILLISTER. 19 total characteristics are documented in the Federal Logistics Information System.