The Screw,machine, cataloged under National Stock Number 5305-00-151-0257, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-151-0257 |
| Primary Part Number | 8825116 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Screw Material Document and Classification | SAE J403 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-671 FED SPEC SINGLE MATERIAL RESPONSE OR 66,UNS G10100 FED STD SINGLE MATERIAL RESPONSE |
| Thread Length | 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Specification/standard Data | 81348-FF-S-92 GOVERNMENT SPECIFICATION AND 88044-AN507/CANCELED/ GOVERNMENT STANDARD |
| Departure From Cited Document | AS MODIFIED BY MATERIAL AND SURFACE TREATMENT |
| Nondefinitive Spec/std Data | 3 TYPE AND 3C STYLE AND 10-32UNF SIZE |
| Screw Material | STEEL COMP 1010 |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE II |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Test Data Document | 81348-FFS92 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNF |
| Head Diameter | 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 8825116 PRIMARY | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament (USA) |
| Reference | Meaning |
|---|---|
| AN507-1032R5 | 5/9 Secondary reference U.S. Government activity |
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
NSN 5305-00-151-0257 is a Screw,machine, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament, classified under FSC 5305, Screws. Status: active.
NSN 5305-00-151-0257 has 1 manufacturer part number on file: 8825116 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament).
Key specifications for 8825116: Screw Surface Treatment: CADMIUM; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Screw Material Document and Classification: SAE J403 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-671 FED SPEC SINGLE MATERIAL RESPONSE OR 66,UNS G10100 FED STD SINGLE MATERIAL RESPONSE; Thread Length: 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.