The Screw,machine, cataloged under National Stock Number 5305-00-150-9134, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Aeronautical Standards Group Dept of Navy and Air Force. Government technical data includes 16 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-00-150-9134 |
| Primary Part Number | AN510-4R8 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | Aeronautical Standards Group Dept of Navy and Air Force |
| Status | ACTIVE |
| Head Style | FLAT COUNTERSUNK |
| Thread Length | 0.458 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Head Diameter | 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN |
| Thread Quantity Per Inch | 48 |
| Thread Series Designator | UNF |
| Fastener Length | 0.500 INCHES NOMINAL IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Screw Material Document and Classification | QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Screw Surface Treatment | CADMIUM |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL OR STEEL COMP 1010 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AN510-4R8 | Aeronautical Standards Group Dept of Navy and Air Force (USA) |
| 1176-4-8 | Naval Air Warfare Center Aircraft Division Joint Base Jbmdl (USA) |
| FFS92ANDTYPE3ANDSTYLE2C | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
NSN 5305-00-150-9134 is a Screw,machine, manufactured by Aeronautical Standards Group Dept of Navy and Air Force, classified under FSC 5305 (No Item Name Available). Status: active.
NSN 5305-00-150-9134 has 3 cross-referenced part numbers: AN510-4R8 (Aeronautical Standards Group Dept of Navy and Air Force), 1176-4-8 (Naval Air Warfare Center Aircraft Division Joint Base Jbmdl), FFS92ANDTYPE3ANDSTYLE2C (Federal Specifications Promulgated by General Services Administration Washington DC).
There are 2 known substitutes for 5305-00-150-9134: 5925-01-478-9634, 4940-01-504-9531. Verify interchangeability with system specifications before substitution.
Key specifications for AN510-4R8: Head Style: FLAT COUNTERSUNK; Thread Length: 0.458 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Head Diameter: 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN; Thread Quantity Per Inch: 48. 16 total characteristics are documented in the Federal Logistics Information System.